6 units Baltech VP-3470 Vibration/Balancing w/Expert software.
END OF YEAR SALE WAS $4495.00 NOW ONLY $3995.00!
free ready to ship 2-day shipping anywhere in USA
Phone 606-694-6741 ** 606-471-0732 or order in the E-store!
$3100.00 FREE SHIPPING FIXTURLASER
ROBO ALIGN 20/20 By HarrisTech
Robotic Shaft Alignment Positioning Systems!
Eliminates horizontal movement static & manual distance input from devices to motor foot requirements. Self powered jacking system that directly responds to and corrects movement change. All these features greatly reduces error and provides for the highest degree of alignment positioning accurancy.
SPECIAL INTRODUCTORY PRICE $ 6995.00
LIFETIME LIMITED WARRANTY !!
Under normal working conditions.
(Free 8 Hours Training At Your Facility With Purchase)
* Video Demonstration Link *
*Control & Computing Module with Robotic manual & automated
positioning systems software.
* Automated jacking eliminates the risk of injury involved with manual jacking.
* 2 Fowler/Sylvac Mark 6 Digital Indicators with a lifetime warranty.
* 6 inch graphic icon represented Color Touchscreen with a 2 year warranty.
* Ethernet Router that enables I phone or Android PDA remote control.
* Positioning Inclinometer
* Soft Foot Correction Program.
* Compensates for indicator sag.
* Vertical and Horizontal Alignment Programs.
* The only system with Horizontal Program software that requires no manual
dimension input measurements therefore eliminating error which provides for
a higher degree of alignment positioning Accuracy.
* The only system with software that compensates the static and dynamic
movement difference which eliminates error and provides for a higher degree
of dynamic alignment positioning Accuracy.
* All necessary Mounting Hardware.
* Using the included 2 - Mark VI Digital Indicators Via 2 way RS 232 communications that
enables a program that guides you through the Horizontal Alignment Process of Aligning
a Shaft or Rotor to a Housing or Container by monitoring the front and rear movement
directional lights and monitoring the ront and rear shaft movement change values displayed
on the display unit or using the Automated Horizontal Jacking supported proccess. Aligning
the Vertical shaft to the Housing and/or the Container by monitoring the front and rear
movement directional lights and placing or removing the front and rear amount of shims that
are displayed under front and rear of the mounting feet.
* Enables the user to email final readings information documents from their smart phone.
Limited Time Offer!
Please follow link below:
BASIC SET UP
SOFT FOOT CALCULATION CORRECTIONS
HORIZONTAL MOTOR SHAFT ALIGNMENT
VERTICAL MOTOR SHAFT ALIGNMENT
SHAFT TO HOUSING ALIGNMENT
DOCUMENT FINAL READINGS THEN EMAIL FILES FROM YOUR SMARTPHONE.
RoboAlign By HarrisTech
AUTOMATED SHAFT ALIGNMENT COMPLETE SYSTEM
SPECIAL INTRODUCTORY PRICE $ 6995.00
Includes $750.00 value in-house training !
Demo system like new! $459595.00
DANNY HARRIS 606-471-0732 SHAFTALIGN@YAHOO.COM
Worlds only Automated Shaft Alignment Systems!
Eliminates horizontal movement static and manual distance input from devices to motor feet measurment requirements. Self powered jacking system that directly responds to and corrects movement change. All these features greatly reduces error and provides for the highest degree of alignment positioning accurancy.
The portable removeable Automated Horizontal Jacking System starts at $2,995.00
and includes Front and Rear Shim Slide Plates, Front and Rear Linear Bearing
Adjustable Mounting Brackets, Front and Rear Electric Horizontal Jacks with the
capacity to align electric motors within the 4000 lb range. The Vertical Front and
Rear Air Bag Lifting System starts at $1,495.00 with the capacity to lift electric
motors within the 6000 lb range. Watch Video: https://www.youtube.com/watch?v=9qrrnVPSQHY
Video Link : http://youtu.be/Rdk2WELwiiE
Harris Technology has invented and developed an Advanced Industrial Motor Shaft Alignment System at an
affordable price. The patented system includes Computing / Device Interphase Module, Control Module, 2
Digital Measuring Devices, with the option to use an Automated Positioning System which eliminates the risk of
injury involved with manual jacking. This system guides you through the alignment process with user friendly
Touch Screen graphic icon represented instructions.
The lights and numeric displays let you know your exact position proximity within .00005" accuracy as you
are achieving the alignment process. This gives you full control of the speed of moving the motor to achieve
the alignment process. The system achieves horizontal alignment without entering user input distance
measurements giving reference to the distance between measuring devices and distances from one of the
measuring devices to the front and rear of the motor feet. This is a requirement of other systems and the
disadvantage is it is difficult to obtain accurate input measurements. The more accurate or abstemious the
input measurement gives the most accurate alignment positioning results. This system utilizes
calculated information that is based only on dynamic direct response readings without user input
information. This system eliminates the disadvantage other systems have and gives the highest possible
level of abstemious minute horizontal dynamic directly responsive calculated positioning accuracy.
The system compensates for any static movement detected and signals in advance when to stop movement.
There exits no other system that compensates for static movement caused by applied pressure difference
against the motor when you are moving the motor to correct the misalignment which affects the alignment
readings. This compensation allows the user to achieve the highest degree of total dynamic horizontal
positioning accuracy. It is accurate within .0003" per axis move.
The Control Module also has the option of using an I Phone, I Pad, Mobile PC or Android PDA as the control
platform. The systems start at $5995.00 without the Automated Jacking Systems. The Automated Horizontal
Jacking System starts at $2995.00 and includes Front and Rear Slide Plates, Front and Rear Linear Bearing
Adjustable Mounitng Brackets, Front and Rear Electric Horizontal Jacks with the capacity to align electric
motors within the 4000 lb range.
The Vertical Front and Rear Air Bag Lifting System starts at $1495.00 with the capacity to lift electric motors
within the 6000 lb range. Would you rather have a system that tells you the amount of movement required
or a system that automatically does the alignment for you?
Harris Technology LLC is proud to be the exclusive
USA and Canada Representative of:
BALTECH Reliability Technologies GmbH
Uranusweg 11, 23562 Lubeck Germany
We invite you to accompany us to the 2016 Scientific and Technical Seminar in Lubeck Germany.
December 8 - 9 2016 http://www.baltech.biz/index.php?nomer=100#day1
We look forward to seeing you there!
Our office hours are:9-5, Monday- Friday
Please contact me for a complete quote:
Danny Harris : email@example.com
We offer the following high quality, affordable
Industrial Reliability Products and solutions.
Vibration Analysis -
Baltech VP-3405 - $ 464.00
Baltech VP-3405-2- $ 704.00
Baltech VP-3410 - $ 736.00
Baltech VP 3450 - $ 2,464.00
Baltech VP 3460 - $ 3,700.00
Baltech VP 3460 - 2- $4,200.00 / Includes Baltech Expert Software
Baltech VP-3470 - $5,420.00 / Includes Baltech Balance Software
Baltech VP- 3470 - $6,160.00 / Includes Baltech Expert Software
Baltech VP- 3470 - $7,392.00 / Explosion Proof Expert Software
Balance - $950.00
Baltech Expert - $1950.00
Baltech SA 4000 - $1230.00
Baltech SA 4100 - $1,968.00
Baltech SA 4200 - $3,680.00
Baltech SA 4300 - $4,928.00
Baltech SA PRO - $5,176.00
Oil and Lubricate Analysis -
Baltech OA 5000 - $3,395.00
Temperature Control -
Infrared Thermometers -
Baltech TL 0208C - $500.00
Baltech TL 0212C - $610.00
. Baltech TL 0215C - $710.00
Thermal Imaging -
Baltech TR 01100 - $3,330.00- $4,920.00
Baltech TR 01200 - $4,750.00 - $6,570.00
Baltech TR 01400 - $6,140.00 - $7,440.00
Baltech TR 01500 - $7,550.00 - $9,300.00
Baltech TR 01700 - $11,770.00 - $13,500.00
Baltech TR 01800 - $16,430.00 - $17,610.00
Rolling Element Bearing Analysis -
Baltech BCM 6050 - $43,410.00
Baltech BCM 6055 - $54,500.00
Baltech BCM 6059 - $75,920.00
Baltech BCM 6150 - $43,410.00
Baltech BCM 6155 - $54,250.00
Baltech BCM 6159 - $75,920.00
Baltech BCM 6259 - $108,430.00
Baltech MRC 6000 - $1,806.00
Geometry Measurement -
Tool Kit -
Baltech Bearing Assembly Tool - $560.00
Induction Heaters -
Baltech HI 1604 - $1150.00
Baltech HI 1610 - $2200.00
Baltech HI 1612 - $3,540.00
Baltech HI 1630 - $3000.00
Baltech HI 1633 - $6,400.00
Baltech HI 1650 - $3,420.00
Baltech HI 1660 - $6,350.00
Baltech HI 1670 - $9,780.00
Baltech Expert - $1,400.00
Baltech Balance - $750.00
Gill Industrial Oil Monitoring Sensors - $570.00